The aim of our study is to ascertain whether a hanging suspension fluorescentlamp for a private home environment is going to be attractive for a largeaudience. We want to open up for new uses of fluorescent lamps as lightsources.The main approach in this work is how to design a fixture with fluorescentlamps as a light source that will meet the requirements and requests of thehome environment could look like. At the same time we want to make a newimpression of how a fluorescent light source.Primarily we used a quantitative method, but this was rejected after a pilotstudy. Instead we used a qualitatively based method in the sense that weconducted a group interview as well as individual interviews.Based on data from the interviews and our preliminary work a prototype wasbuilt. This prototype is a fluorescent fixture equipped with 2x14W T5fluorescent lamps, dimmed separately.

In Uppsala, Sweden, Vattenfall has a combined heat and power plant. On the premises there is an engineering workshop with old fluorescent and mercury lamps that need to be replaced. This provides a great opportunity to save energy and money by installing more efficient lighting. The main purpose of this study was to present two functional and energy efficient lighting systems including control system. The lighting systems were designed by investigating the working environment, measuring illuminance and by simulations in the software DIALux.

This thesis investigates how the optical properties of paperboard influences printing with targets in ISO 12647-2. The targets for optical properties in ISO 12647-2 are defined for paperboard without optical brightening agents and fluorescent brightening agents wich makes it difficult to reach the targets when printing paperboard containing these agents.Seven different types of paperboard, some with and some without the agents, have been printed and instrumentally andvisually measured to see if there is any deviation from the standard targets and if it shows visually.The result shows that paperboard containing optical brightening agents and fluorescent brightening agents can print with targets in ISO 12647-2 but in many measurments the difference between the types of paperboard were to small to assess. The differences between the types of paperboard in the instrumental measurements did not fully correspond with the waythe panel appraised them visually..

In my project I worked with fluorescent color and fear as a theme together. It was based on my question for what happens when you take all the lights out and highlight a fear or phobia. I wanted to experiment and explore the course of event within the surface of a picture by using this kind of paint.I worked with illustration and pattern to bind the two pictures together. The aim was to investigate what is possible with the picture as a medium and work with contrast to make it as effective as possible. My goal was to make one poster of each fear and to make them work together as a series as it?s best.I asked myself many questions such as;? What happens to the surface, image and room when you use this color?? Will a new quality appear?? What happens when you mix two pictures together on a parallel level that only show in different kind of light?.

During the 1930´s the hot potato for the Swedish lighting associations were how to create the most suitable light for every situation, either for industries, offices or homes. The light bulb were the most frequently used source of light but due to limitied luminous intensity, big halls sometimes required up to hundreds of light bulbs to produce the right amount of light. Two kinds of different lights, by different reasons, can be titled the predecessors of the fluorescent lighting during the 1930´s: The volfram-filament tube light due to its estetic similarities and the electric discharge (mercury- and sodium-) lamps due to its technical resemblance. Even though they came in quite wide use (the volfram tube in public halls (e. g.

This paper evaluates the prospects for utilizing aquaculture effluents as a nutrient source in organic hydroponic, as is the case in aquaponics. The development of organic hydroponics is dependent on replacing synthetic fertilizers with organically derived nutrients, such as those found in aquaculture effluents. Also, in hydroponic cultivation the establishment of a plant pathogen suppressive micro flora is part of the plant protection strategy. Therefore, both nutritional and microbial qualities of aquaculture water and organic hydroponic nutri-ent solution were analyzed and compared. Results showed both aquaculture water and or-ganic hydroponic solution to be deficient in a number of essential elements, although or-ganic hydroponic solution was closer to recommendations.

Det är tydligt att utseende påverkar vilka ansikten människor kommer ihåg och inte. Skulle det gå att öka eller minska igenkännbarheten genom att utföra små ändringar i ansikten mellan de tillfällen en person ser dessa? I denna undersökning har jag analyserat resultat från undersökningar genomförda av 170 personer och och kommit fram till att det är möjligt till en viss grad. Ytterligare extensiv forskning bör visserligen ske innan man kan bekräfta dessa studier, men skulle så bli fallet kan detta potentiellt påverka hur karaktärer i spel och andra medium designas..

This report describes a project, which was carried out as a final thesis covering 30 ECTS during the final semester of the Master of Science programme Industrial Design. The assignment was issued by Fagerhults Belysning AB in Habo. The assignment was to design a family of products in which LED was to be used as a source of light. The main focus in the initial part of the project was to find a way to design the inside of armature which was suitable for LED technology. An armature, already in the range of products at Fagerhult, with the desired qualities that was to be strived after was the Zintra. The lighting source of the Zintra is a compact fluorescent lamp.

This report describes a project, which was carried out as a final thesis covering 30 ECTS during the final semester of the Master of Science programme Industrial Design. The assignment was issued by Fagerhults Belysning AB in Habo. The assignment was to design a family of products in which LED was to be used as a source of light. The main focus in the initial part of the project was to find a way to design the inside of armature which was suitable for LED technology. An armature, already in the range of products at Fagerhult, with the desired qualities that was to be strived after was the Zintra. The lighting source of the Zintra is a compact fluorescent lamp.

Fertility is of central interest in the dairy production but has during the last decades declined. Increased milk yield has resulted in high pressure on the metabolism of the dairy cows that are supposed to manage the transition from dry cows to lactating cows within a few weeks around the parturition. Much indicate that metabolism and fertility are closely linked, with insulin playing a substantial part. There are many studies suggesting that the main part of gestation loss can be found during the early embryo development, a period which can be studied in vitro. The aim of this study was to test the effect of insulin during maturation in vitro and to evaluate two different fluorescent stainings on oocytes and embryos; a nuclear stain and a staining of apoptotic cells through the terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL)-method. Bovine cumulus-oocyte-complexes (n=991) were aspirated from abattoir-derived ovaries.

The connection between fluorescence and color management still is a relatively unexplored area. Thefollowing composition analyses the theory that when printing on fluorescent ink jet paper using ICCprofilesa more yellow print will appear. In theory the ICC-profile compensate for blue light that fluorescefrom the paper with the complementary color, yellow. The human eye apprehands this fluorescentlight as white.When categorizing a number of ink jet qualities some tests to indicate change of color in the final printwere made. Five qualities were chosen for further analyses, each with different white point.

The aim of this master thesis was to examine a possible connection between chromatin functions and the DNA damage repair system, with the imprinted IGF2/H19 locus as a bait. Interactions can occur within and between chromosomes and it has been shown that H19 ICR on both alleles can communicate with alleles on other chromosomes. The methylation-sensitive insulator protein CTCF is bound on the maternal H19 ICR and acts as an insulator by blocking the IGF2 promoter to access its enhancers. This is possible by formation of loop structures by CTCF that enables intra and inter-chromosomal interactions. CTCF is poly(ADP-ribosyl)ated by PARP-1 when it is bound to H19 ICR.

Background: Chemotherapy and radiation resistance are major causes of failure in cancer treatment. The response to treatment in cancer cells depends on several mechanisms and pathways such as Janus kinases-signal transducers and activators of transcription JAK/STAT pathway. STAT1 was the first described transcription factor in the STAT family. STAT1 is activated by stimulation of signaling proteins such as type II interferon (IFN- ?) and the activated STAT1 translocates from cytoplasm to nucleus.

Cyanobacteria belong to the oldest organisms of our planet. They use photosynthesis to produce ATP and gain biomass from carbon dioxide. The cyanobacteria Nostoc punctiforme is a filamentous bacterium that consists of two different types of cells, vegetative cells and heterocysts. The type of cell it differentiates into depends on the media they grow in. In an ammonium-rich medium, the N.punctiforme consists of vegetative cells that differentiate into heterocysts when in the medium is changed to a low-concentration ammonium medium.

Badminton är en inomhussport som människor i alla åldrar och på alla nivåer kan utöva. Ju högre nivå sporten utövas på ju mer krav ställs på belysningen. I många badmintonhallar används idag armaturer som bidrar till bländning och som inte ger en god synkomfort. Badminton är världens snabbaste racketsport vilket gör att kraven på belysningen är hög. Utan tillräckliga riktlinjer gällande belysningsanläggningens utformning som ska säkerställa en god belysning för spelarna kan det bli svårt för dessa att hinna uppfatta fjäderbollen, då spelet går väldigt snabbt och mycket rörelser sker på badmintonplanen.Syftet är att öka förståelsen för vilka faktorer som är viktiga att ta hänsyn till vid planering av ny belysning i badmintonhallar.Metoderna som användes i studien var observationer, ljusmätningar, intervjuer och enkätundersökningar.